Determinants of service life of connectors
Date:2017-08-12 15:14:18
Due to the continuous development of technology, people's living standard is more and more high, a lot of guanglai HRS connector in our side, mainly because of its wide range of uses, has brought great convenience to our life. As for a connector, the electrical function provides the effect in the resistance, so it relates to the safety factor of a circuit. The first is in direct touch to one end of the resistor will be provided with a step-down function, the pressure here are voltage, a power resistance of livestock with high quality, so that should have appropriate stability in the adapter, can control a good will secure a transfer resistance the omission of the situation does not appear. While numerical touch connectors and resistance from several milliohm to ten milliohm on such a scale, the center value is selected according to different uses, the use of direct contact is a connector using life, if the resistance is too large, the connector itself is the color change, heat and accept the voltage will lead to protection film outside of the adapter was burned, formed a serious internal damage.
But the insulation resistance of the present, is just one use to balance such conditions, the insulation resistance in this process, is used to measure the connector between the connector and touch part and an insulating function by itself, this part of the plan is to have the vast current resistance function, so in the process of if there are errors in the range will be a direct result of this group may be due to circuit resistance is too large or cannot use the formation damage.
The number is much higher than the touch resistance, the maximum to begohm range, so that in use should pay special attention to convergence and application in this area, as long as the master of the power adapter full control of this technology can better, the real will of a circuit control device in a current the scale of security within. In addition, the electric resistance is also the part of the voltage that is not missing. The test here is the ability to accept the voltage externally, and there is no connection between it and its own raw materials.
The above is a small series of Canton HRS connector life of the determinants of a brief introduction, please refer to the site for more details.